Features:

*Dual Dell 24” Ultrasharp Monitors On Chief FTR1U Tilt Mounts In Lid

*Monitor Lid Supported By Gas Springs

*All Factory IEC Cables Replaced w/Locking IEC Cables – Labeled At Both Ends

*Slide Out Main Work Surface. Usable Dims: 50” wide x 20.5” deep x 7.75” tall

*Dual 4RU Shock Mounted Racks: 7” Depth, Front & Rear Rail

*Dual 9RU Shock Mounted Rack: 24” Depth, Front & Rear Rail

*4” Colson Casters w/Full Sized ¾” Birch Caster Board

*Table Legs In Front Lid

*Max OD Dims Including Corners & Casters: 53” wide x 34” deep x 51.625” tall

*525lbs

Description: 

The case interior is finished with black textured coating. The flip up lid features 2 Dell 24" Ultrasharp monitors mounted on tilting Chief mounts supported by integrated gas springs. Below the flip up lid is a dual bay 4RU shock mounted racks that are 7" deep.. The slide out work surface has usable area of 50" wide x 20.5" deep, with a usable height of 7.75”. The slide out work surface is built out of 3/4" Baltic Birch plywood and mounted on heavy duty Accuride drawer glides. The work surface also features a multi-position locking latch system that allows it to be pulled out and locked in various extended positions.  Below the work surface, is a double wide 9RU shock mounted rack section that has 24" of rack-able depth

The exterior case is built out of 1/2" plywood laminated with your choice of ABS plastic and features deep recessed hardware and Colson 4" casters. Table legs are mounted in the front lid.