Features: 

*Front Mounted Pocket Door

*Enterprise Grade Printer Mounted On A Slide Out Shelf:

  -Color Laser

  -Print, Scan, Copy, Fax

  -1200 x 1200 dpi Resolution

  -Automatic Duplex Printing

*2 Storage Drawers

*Printer / Drawer Compartment Specs:

  -½” Baltic Birch Plywood Construction

  -HD Locking Drawer Glides

  -Modern Stainless-Steel Bar Pull Handles

  -Foam Isolated From Exterior Case

*Rear Mounted IO Panel:

  -Recessed “Male” Hubbell 5278 Power Inlet

  -Locking Neutrik Cat6 Jack

  -Neutrik USB 2.0 Jack

*LM Tour Systems 25ft Ethercon – Industrial RJ45 Cat6 Network Cable

*LM Tour Systems 25ft 12awg Power Cables

*4” Colson HD Casters (2 Locking)

*4 Deep Recessed Handles

*Max Exterior Dimensions Including Corners & Casters: 30” wide x 30” deep x 42” tall

*Printer Tray Height From Ground: (Mid Tray: 33”), (Top Tray: 39”)

*305lbs

Description: 

The medium format printer case built by LM Cases is designed with touring production managers in mind. The case comes fully integrated and is a turn-key system. The 30” x 30” exterior dimensions are designed to be a third pack cube in a 90” truck. The color laser printer is installed by the LM Cases Custom Integration Dept and is mounted on a slide out shelf. 2 storage drawers are provided. 

The printer/drawer structure is isolated from the exterior case on all sides by a combination of 2lb and 4lb PE foam. The structure is built from ½” Baltic Birch plywood and is finished with black texture coating. Each drawer is mounted on HD locking glides and features a modern stainless steel bar handle. 

The enterprise grade color laser printer is mounted on a slide out shelf. The printer can be used inside of the case, or fully extended to access the top loading tray. The LM Cases custom integration department upgraded the factory power cable with a locking IEC wired directly to a fully enclosed Hubbell “male” 5278c inlet on the back of the case. A custom cable loom containing a cat6 and USB 2.0 cable are wired to the rear mounted IO box. A LM Tour Systems Audio Grade Cat6 cable is provided with the system. This cable is built from Belden 1303e double shielded Cat6 cable. One end of the cable features a locking Neutrik NE8MX6 Cat6 connector on one end, with an industrial RJ45 connector on the other. The cable is designed to lock into the IO box on the case via the Ethercon connector, while the RJ45 connector on the opposing end interfaces with standard Ethernet jacks. The cable features a flexible exterior jacket and wraps easily like any standard power or audio cable. A 25ft 12awg LM Tour Systems power cable is also provided. 

The inner shell features 2 storage drawers with interior dimensions of 21.75” wide x 22.75” deep x 4” tall. The case exterior is built from ½” plywood laminated with your choice of ABS plastic colors. The hardware set includes 4” Colson casters (2 locking) and 4 deep recessed handles. The front pocket door is designed to slide into the side of the case shell which eliminates the need to store a lid at a show site.