Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6

Portable Video FlyPack w/Audio & Video Integration

$10,999.00 $7,999.00
(You save $3,000.00)

Product Description


*Dual Dell 24” Ultrasharp Monitors On Chief FTR1U Tilt Mounts In Lid

*Monitor HDMI & Power Routed To Bottom Double Wide Rack

*Monitor Lid Supported By Gas Springs

*KRK Rockit5 Speakers Installed

*All Factory IEC Cables Replaced w/Locking IEC Cables – Labeled At Both Ends

*All Audio Signal Cable Built From Canare Starquad – Labeled At Both Ends

*2 Tripplite RS1215 PDUs Installed

*Slide Out Main Work Surface. Usable Dims: 59.75” wide x 20” deep x 6.5” tall

*Center Mounted IO Panel:

    -4 Edison Power Outlets

    -4 USB 3.0 A-A Jacks

    -HDMI Jack

    -3.5mm Aux Jack 

*Dual 5RU Shock Mounted Racks: 10” Depth, Front & Rear Rail

*Dual 10RU Shock Mounted Rack: 29” Depth, Front & Rear Rail

*2RU Audio/Video IO Panel

*6 – 4” x 2” HD Colson Casters w/Full Sized ¾” Birch Caster Board

*Max OD Dims Including Corners & Casters: 64.5” wide x 34” deep x 58” tall




The case interior is finished with black textured coating. The flip up lid features 2 Dell 24" Ultrasharp monitors mounted on tilting Chief mounts supported by integrated gas springs. Below the flip up lid is a dual bay 5RU shock mounted racks that are 10" deep. The double wide 5RU rack section features a KRK speaker on either side. The slide out work surface has usable area of 59.75" wide x 20" deep and an IO panel that has 4 Edison outlets, 4 USB outlets, an HDMI jack and a 1/8" audio input jack. The slide out work surface is built out of 3/4" Baltic Birch plywood and mounted on heavy duty Accuride drawer glides. The work surface also features a multi-position locking latch system that allows it to be pulled out and locked in various extended positions.  Below the work surface, is a double wide 10RU shock mounted rack section that has 28" of rack-able depth. The rack section features a custom 2RU IO panel that features 8 BNC jacks, 2 Cat 5 Jacks and 6 XLR jacks. Each of the custom panels in the case were built out of 1/8" anodized brushed aluminum and feature laser etched labels. All cables are neatly dressed and labeled at both ends. 

The exterior case is built out of 1/2" plywood laminated with your choice of ABS plastic colors and features deep recessed hardware and Colson 4" x 2" casters.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Please Allow 3 Weeks For Construction
Maximum file size: 512 MB



View all categories

Connect with us